SEL Communications  
20 Years of Innovation My Cart

Fiber-Optic Products RS-232 Port Isolator Annunciator I/O Products Power Supplies Encrypting Transceivers Ethernet Products Magnetic Cable Guides USB to RS-232 Cables Handheld Devices


Ten-Year Warranty

  Port Isolator
SEL-2910 Port Isolator

SEL-2910 Port Isolator
Isolate and protect 9-Pin RS-232 ports from destructive induced voltages.

Use the SEL-2910 Port Isolator to protect the RS-232 ports of data terminal or data communications equipment from the effects of induced voltages. Increase data reliability by breaking the path for ground loops. If you have to have long runs of RS-232 cables through harsh electrical environments, the SEL-2910 can provide the isolation you need. Powered directly from the data lines.SEL-2910 Application Drawing


SEL-2910 Block DiagramFeatures
  • Compact Size
  • Data Powered
  • Ten-Year Warranty
  • Extended Temperature Range

 

Technical Specifications

Data Rate

Up to 38.4 kbps

Electrical Connector

DB-9 (male / female)

Operating temperature

-40° to +85° C

Humidity

95% non-condensing

Price

$86.00

 

SEL-2910 Compliance
Cold
EN 60068-2-1: 1990/1993, Test Ad; 16 hr. at -40°C
Dry Heat
EN 60068-2-2: 1974/1993 Test Bd; 16 hr. at +85°C
Damp Heat, Cyclic
IEC 60068-2-30: 1980, 25°-55°C, 6 cycles, 95% humidity
Vibration
IEC 60255-21-1: 1995, Class 1 (Endurance); Class 2 (Response)
Shock and Bump
IEC 60255-21-2: 1995, Class 1 (Endurance); Class 2 (Response)
Seismic
IEC 60255-21-3: 1995, Class 2 (Quake Response)
Electrostatic Discharge
EN 60255-22-2: 1996, Levels 1, 2, 3, 4
EN 61000-4-2: 1995, Levels 1, 2, 3, 4
Dielectric Strength
IEC 255-5: 1977, IEEE C37.90: 1989
2500 Vrms, 1 minute.
Applied between male and female DB-9 ports.
Radiated Radio Frequency
ENV 50140: 1993, 10 V/m
IEC 60255-22-3: 2000,
Exception: 4.3.2.2 freq. sweep w/200 steps per octave
IEEE C37.90.2: 1987,
Exceptions:
5.2.2 frequency sweep w/200 steps per octave,
5.5.3 digital equipment modulation test not performed,
5.5.4 test signal turned off between frequency steps to simulate keying
IEEE C37.90.2: 1995, 35 V/m
Surge Withstand
IEEE C37.90.1: 1989
IEEE PC37.90.1/D6: 2000 (Draft Standard)
3000 V oscillatory, 5000 V transient.
Applied to shell and pins of DB-9F connectors.
Fast Transient
Level 4. Applied to communication cables connected to SEL- 2910 (DB-9F).
IEC 255-22-4: 1992, EN 61000-4-4: 1995

For shipping outside the USA, or for tax exempt orders, please contact SEL Customer Service to place your order.

Ordering Option
Description Part Number Price

SEL-2910

2910

$86

Add to Order

 

   

 


Privacy Policy | Site Map | Contact    
Copyright © SEL 2008 (All rights reserved).